Filter
Top Products
-34-
For Machines Mfg. Since 7/09
Model SB1016/SB1036
OPERATION
AH. Tailstock Lock Bolt: Tightens a secondary
tailstock clamp to assist the primary
tailstock lock lever and clamp.
AI. Offset Scale: Indicates the distance of
tailstock offset from the spindle centerline
with arbitrary marks.
AJ. Tailstock Stop Pin: Prevents the tailstock
from sliding off of the ways.
Figure 43. Tailstock controls.
AH
AI
AJ
Tailstock Controls
AB. Quill: The quill has an MT#5 bore, metric
and inch scale, and drift slot to remove tight-
fitting tooling.
AC. Quill Lock Lever: Locks the quill in position.
AD. Tailstock Lock Lever: Secures the tailstock in
place along the bedway.
AE. Handwheel: Moves the quill toward or away
from the spindle, and is quipped with a
graduated collar divided in increments of
0.001" where 360°= 0.200".
AF. Gib Screws: Adjust a tapered gib to control
tailstock sliding accuracy.
AG. Tailstock Offset Screws: Adjusts the
tailstock offset left or right from the spindle
centerline.
AF
AG
AB
AC
AE
Figure 42. Tailstock controls.
AD
Chip Drawer
The chip drawer shown in Figure 44 catches
cutting fluid and metal chips during the
machining process. It slides open for easy
cleaning.
Also, the chip drawer contains a screen that
allows runoff cutting fluid to drain back into the
cutting fluid tank.
Figure 44. Chip drawer.