Filter
Top Products
e-STUDIO160/200/250 ADJUSTMENT ITEMS 1 - 4 December 2002 TOSHIBA TEC
Classification Error code Machine status
CALL SERVICE from the
optical system
CALL SERVICE from the
process system
CALL SERVICE from fuser
area
CALL SERVICE from commu-
nication
CALL SERVICE from ADF or
RADF
C21 Carriage initialization error
C22 to C24 Reserved
C25 Scanner unit watch dog error
C26 Exposure lamp disconnection or peak detection error
C27 to C30 Reserved
C31 to C37 Reserved
C38 Replaced process unit error
C39 to C40 Reserved
C41 Abnormal thermistor or heater disconnection at power ON
C42 Reserved
C43 Warming up mode after disconnection judgment, or ab-
normal thermistor after ready
C44 Warming up mode after disconnection judgment, or heater
abnormal after ready
C45 Thermistor disconnection at the end part of heater
C46 to C50 Reserved
C51 to C55 Reserved
C56 Communication error between PFC and main unit
C57 Communication error between main unit and IPC
(e-STUDIO200/250 series)
C58 Communication error between IPC and finisher
(e-STUDIO200/250 series)
C59 to C70 Reserved
C71 Paper supply motor lock error
C72 Reserved
C73 EE-PROM initialization error
C74 Defective adjustment by the exit/reversal sensor detected
C75 to C80 Reserved
C81 Fan motor lock error
C82 Document aligning lower sensor (RADF)/Aligning sensor
(ADF) adjustment error
C83 Size length adjustment error
C84 to C89 Reserved