Filter
Top Products
e-STUDIO160/200/250 ADJUSTMENT ITEMS 1 - 78 December 2002 TOSHIBA TEC
(b) Image distortion adjustment
After installing scanner assembly in the copier, make an copy (LD: NAD model, A3: MJD/CND/AUD/
ASD/SAD models) and check it for skew. If skew occurs, make adjustments in the following manner:
1. If the skew is as shown below, with carriage 1 securely held to the left side frame, loosen the wire
fixing screw on the front side, separate (adjust) the front side of carriage 1, and then secure it.
Fig. 1-8-14
Fig. 1-8-13
2. If the skew is as shown below, with carriage 1 securely held to the left side frame, loosen the wire
fixing screw on the rear side, separate (adjust) the rear side of carriage 1, and then secure it.
Carriage 1
Screw
Carriage 1
Carriage 1
Screw
057-3-1
057-4-1
057-3-2
057-4-2