Toshiba e-Studio200 Work Light User Manual


 
e-STUDIO160/200/250 UPDATING THE FIRMWARE 5 - 16 December 2002 TOSHIBA TEC
(6) Press any key on the PC.
Downloading of the main data begins.
Screen display on the PC
LCD display on the copier
05-03-021
Boxes ( ) are displayed one by one
(2 rounds).
Boxes ( ) are erased one by one.
Important: Some time after downloading begins, the message prompting you to perform the next
operation appears on the PC screen. However, downloading is in progress until the LCD of
the copier blinks as shown below. Do not perform any operation. Performing any operation
during this period may cause the downloading to be discontinued and fail and the copier
may not be recovered unless you use the recovery PWA.
Note: The downloading time is about 8 minutes.
When downloading ends, all the dots on the copier LCD will blink.
11