Filter
Top Products
December 2002 TOSHIBA TEC 4 - 75 e-STUDIO160/200/250 TROUBLESHOOTING
(17) Poor fusing
Step
1
2
3
4
Cause/Defect area
Paper
Fuser unit
Measures
Change paper.
Check mechanism.
Check heater control circuit.
Replace process unit or fuser unit.
Check items
Paper dump?
Pressure springs working nor-
mally?
Heat roller temperature too low?
If problem persists after measures
are applied, or there is no prob-
lem fund in the above check, fol-
low procedure described in right
column.
Feeding direction