Filter
Top Products
e-STUDIO160/200/250 ADJUSTMENT ITEMS 1 - 42 December 2002 TOSHIBA TEC
* #
Select TEST MODE
SET
SET
Select MEMORY WRITE
SET
Select MAINTENANCE
Enter SERVICE MODE
Use or keys
PROGRAM
01.DEFAURT SETTINGS
02.LISTS
03.INITIAL SETUP
Input DATA
Press the PROGRAM key
Input ADDRESS
SET
* *
PROGRAM
Use or keys
Use or keys
Hex data entry method
A: * and 0
B: * and 1
C: * and 2
D: * and 3
E: * and 4
F: * and 5
***SERVICE MODE***
03.INITIAL SETUP
04.MENU MAP
05.TEST MODE
TEST MODE
04.FUNCTION TEST
05.MAINTENANCE
06.SERVICE LIST
MAINTENANCE
01.MEMORY CLEAR
02.SET FUNCTION
03.MEMORY WRITE
SET
CANCEL
MEMORY WRITE
ADDRESS =
(4) ERROR COUNTER SHIFT
Refer to the Service Handbook (GD-1061).
(5) PIX MEMORY TRANSFER
Refer to the Service Handbook (GD-1061).
(2) SET FUNCTION
Refer to the Service Handbook (GD-1061).
(3) MEMORY WRITE
You can refer to and change the data stored at each address in the SRAM and DRAM.
ADDRESS and DATA input it with hex data.
<Key used in operation> <Display messages>
MEMORY WRITE
ADDRESS= XXXXXX
DATA= YY