Filter
Top Products
17
WALL MOUNTING
Depending on location, the light
fixture may need to be adjusted
from its packaged position.
When mounting on a wall parallel
to the opener, rotate the receiver
module inward to a maximum of
90° until the receiver module is best
aligned with the sending LED.
Mount light to a receptacle and align
the receiving module per previous
instructions.
To mount the light fixture on a wall
perpendicular to the opener, leave
receiving module in the factory
position.
Mount the fixture to a receptacle
and align receiving module per
previous instructions (Step 12). Insert hole plug into the screw hole. NOTE: For temperature protection, the
hole plug must be in place prior to using the light fixture.
Screw in a 75W maximum light bulb into light socket and snap diffuser into light fixture. Turn receptacle
power back on at fuse box.
Final alignment of the light fixture to the opener may be needed once the opener is electrically connected.
SOCKET
(75W MAX.)
RECEIVING
MODULE
DIFFUSER
ROTATE 90°
(IF NECESSARY)
#6-32 X 3/4”
PHILLIPS PAN
HEAD SCREW
DUPLEX
RECEPTACLE
LIGHT
FIXTURE
HOLE PLUG
LIGHT BULB (NOT
INCLUDED)
NOTE: RECEPTACLE COVER MUST BE INSTALLED IN BETWEEN THE
LIGHT FIXTURE AND THE WALL