Filter
Top Products
Prestige 792H G.SHDSL Router
17-10 Maintenance
Table 17-5 Diagnostic DSL Line
“Start to reset xDSL...
Reset xDSL Line Successfully!”
Back
Click this button to go back to the main Diagnostic screen.
17.5 Firmware Screen
Find firmware at www.zyxel.com in a file that (usually) uses the system model name with a "*.bin"
extension, e.g., "Prestige.bin". The upload process uses HTTP (Hypertext Transfer Protocol) and may take up
to two minutes. After a successful upload, the system will reboot. See the Firmware and Configuration File
Maintenance chapter in the parts that document the SMT for upgrading firmware using FTP/TFTP
commands.
Only use firmware for your Prestige’s specific model. Refer to the label on the
bottom of your Prestige.
Click Firmware to open the following screen. Follow the instructions in this screen to upload firmware to
your Prestige.
Figure 17-7 Firmware Upgrade