ZyXEL Communications 792H Router User Manual


 
Prestige 792H G.SHDSL Router
LAN 22-1
Chapter 22
LAN Setup
This chapter shows you how to configure the LAN settings for your Prestige.
22.1 Ethernet Setup
This section describes how to configure the Ethernet using Menu 3 – Ethernet Setup. From the main
menu, enter 3 to open the menu as follows.
Figure 22-1 TCP/IP Ethernet Setup
22.1.1 LAN Port Filter Setup
In this menu type 1 to open Menu 3.1- LAN Port Filter Setup. Use this menu to specify filter set(s) that
you want to apply to Ethernet traffic. You seldom need to filter Ethernet traffic; however, the filter sets may
be useful for blocking certain packets, reducing traffic and preventing security breaches.
Figure 22-2 LAN Port Filter Setup
Menu 3 - Ethernet Setup
1. LAN Port Filter Setup
2. TCP/IP and DHCP Setup
Enter Menu Selection Number:
Menu 3.1 – LAN Port Filter Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel: