Filter
Top Products
Prestige 791R G.SHDSL Router
Remote Node TCP/IP Configuration 24-3
Figure 24-2 Remote Node Profile
Table 24-1 Remote Node Profile
FIELD DESCRIPTION EXAMPLE
Rem Node Name Type a unique, descriptive name of up to eight
characters for this node.
myISP
Active
Press [SPACE BAR] and then [ENTER] to select Yes to
activate or No to deactivate this node. Inactive nodes
are displayed with a minus sign “–“ in SMT menu 11.
Yes
Encapsulation
PPPoA refers to RFC-2364 (PPP Encapsulation over
ATM Adaptation Layer 5). PPPoE refers to RFC 2516
(PPP Encapsulation over Ethernet).
If RFC-1483 (Multiprotocol Encapsulation over ATM
Adaptation Layer 5) or ENET ENCAP are selected,
then the Rem Login, Rem Password, My Login, My
Password and Authen fields are not applicable (N/A).
ENET ENCAP
Multiplexing Press [SPACE BAR] and then [ENTER] to select the
method of multiplexing that your ISP uses, either VC-
based or LLC-based.
LLC-based
Service Name
When using PPPoE encapsulation, type the name of
your PPPoE service here.
N/A
Incoming:
Rem Login
Type the login name that this remote node will use to
call your Prestige. The login name and the Rem
Password will be used to authenticate this node.
Menu 11.1 - Remote Node Profile
Rem Node Name= myISP
Active= Yes
Encapsulation= RFC-1483
Multiplexing= VC-based
Incoming:
Rem Login= N/A
Rem Password= N/A
Outgoing:
My Login= N/A
My Password= N/A
Authen= N/A
Route= IP
Bridge= No
Edit IP/Bridge= No
Edit ATM Options= No
Telco Option:
Allocated Budget(min)= N/A
Period(hr)= N/A
Schedule Sets= N/A
Nailed-Up Connection= N/A
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= N/A
DELETE PROFILE:
Press Space Bar to Toggle.
Edit IP/Bridge Options
in menu 11.3.
Edit Filter Sets in menu
11.5.
Edit ATM Options in
menu 11.6.