Filter
Top Products
Prestige 791R G.SHDSL Router
30-6 System Maintenance
Step 3. Enter 1 from Menu 24.3 — System Maintenance — Log and Trace to display the error log in
the system.
After the Prestige finishes displaying the error log, you will have the option to clear it. Samples of typical
error and information messages are presented in the next figure.
Figure 30-7 Sample Error and Information Messages
30.4.2 Syslog
The Prestige uses the UNIX syslog facility to log the CDR (Call Detail Record) and system messages to a
syslog server. Syslog can be configured in Menu 24.3.2 — System Maintenance — UNIX Syslog, as
shown next.
Figure 30-8 System Maintenance — Syslog and Accounting
You need to configure the UNIX syslog parameters described in the following table to activate syslog then
choose what you want to log.
59 Thu Jan 01 00:00:03 1970 PP0f INFO LAN promiscuous mode <0>
60 Thu Jan 01 00:00:03 1970 PP00 -WARN SNMP TRAP 0: cold start
61 Thu Jan 01 00:00:03 1970 PP00 INFO main: init completed
62 Thu Jan 01 00:00:19 1970 PP00 INFO SMT Session Begin
63 Thu Jan 01 00:00:24 1970 PP0a WARN MPOA Link Down
Clear Error Lo
g
(y
/n
)
:
Menu 24.3.2 - System Maintenance - UNIX Syslog
UNIX Syslog:
Active= No
Syslog IP Address= ?
Log Facility= Local 1
Types:
CDR= No
Packet triggered= No
Filter Log= No
PPP Log= No
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.