Filter
Top Products
Prestige 792H G.SHDSL Router
LAN 22-5
Table 22-2 TCP/IP and DHCP Ethernet Setup
FIELD DESCRIPTION EXAMPLE
DHCP Setup
DHCP
If set to Server, your Prestige can assign IP addresses, an IP
default gateway and DNS servers to Windows 95, Windows
NT and other systems that support the DHCP client.
If set to None, the DHCP server will be disabled.
If set to Relay, the Prestige acts as a surrogate DHCP server
and relays DHCP requests and responses between the
remote server and the clients. Enter the IP address of the
actual, remote DHCP server in the Remote DHCP Server in
this case.
When DHCP is used, the following items need to be set:
Server
(default)
Client IP Pool Starting
Address
This field specifies the first of the contiguous addresses in the
IP address pool.
192.168.1.33
Size of Client IP Pool This field specifies the size or count of the IP address pool. 32
Primary DNS Server
Secondary DNS
Server
Enter the IP addresses of the DNS servers. The DNS servers
are passed to the DHCP clients along with the IP address and
the subnet mask.
Remote DHCP Server
If Relay is selected in the DHCP field above then enter the IP
address of the actual remote DHCP server here.
TCP/IP Setup
IP Address Enter the (LAN) IP address of your Prestige in dotted decimal
notation
192.168.1.1
IP Subnet Mask Your Prestige will automatically calculate the subnet mask
based on the IP address that you assign. Unless you are
implementing subnetting, use the subnet mask computed by
the Prestige.
255.255.255.
0
RIP Direction
Press [SPACE BAR] to select the RIP direction. Choices are
Both, In Only, Out Only or None.
Both
(default)
Version
Press [SPACE BAR] to select the RIP version. Choices are
RIP-1, RIP-2B or RIP-2M.
RIP-1
(default)