Filter
Top Products
Prestige 792H G.SHDSL Router
WAN 3-5
Table 3-1 Wizard Screen: WAN Setup
LABEL DESCRIPTION
Service Type
Select Client if your Prestige will act as a client device or Server if your Prestige will act as
a server (see Service Type).
Transfer Rate
Rate Adaption
If you enable Rate Adaption, the Prestige connects at the optimal transfer rate between the
min and max rates below. If you disable Rate Adaption, the Prestige attempts to connect at
the maximum transfer rate configured. If that rate can’t be attained, the connection does not
succeed.
Max Rate
Min Rate
Select transfer rates from the Max Rate and Min Rate drop-down list boxes. For back-to-
back applications make sure that your Prestige and its peer have the same Transfer Max
Rate and the same Transfer Min Rate.
Standard
Mode
If your Prestige is a server, then select the mode that applies to your region: ANSI American
National Standards Institute) and ETSI (European Telecommunications Standards Institute).
If your Prestige is a client, select the same Standard Mode that the server side selects.
Next
Click this button to go to the next wizard screen.