Filter
Top Products
Prestige 792H G.SHDSL Router
Dial Backup 21-1
Chapter 21
Dial Backup
This chapter shows you how to configure Dial Backup for your Prestige.
21.1 Dial Backup Overview
To set up the auxiliary port (Dial Backup or CON/AUX) for use in the event that the regular WAN
connection is dropped, first make sure you have set up the switch and port connection (see the Quick Start
Guide for the Hardware Installation chapter), then configure:
1. Menu 2 - WAN Setup,
2. Menu 2.1 - Advanced WAN Setup and
3. Menu 11.1 - Remote Node Profile (Backup ISP) as shown next
21.1.1 Configuring Dial Backup in Menu 2
From the main menu, enter 2 to open menu 2.
Figure 21-1 Menu 2: Dial Backup Setup
Menu 2 - WAN Setup
Service Type= Client
Rate Adaption= Enable
Transfer Max Rate(Kbps)= 2312
Transfer Min Rate(Kbps)= 2312
Standard Mode= ANSI(ANNEX_A)
Dial-Backup:
Active= No
Port Speed= 115200
AT Command String:
Init= at&fs0=0
Edit Advanced Setup= No
Press ENTER to Confirm or ESC to Cancel: