Top Page > Getting Started > Restricting Machine Functions According to User > Enabling the User Restriction Settings
Enabling the User Restriction Settings
This section describes how to set the machine to permit only authorized users to copy, send faxes, or scan
using the control panel.
Using Web Browser, select the function you want to restrict, and then register the users who can use that
function. For each user, you can specify which functions are available upon authentication.
A maximum of 20 users can be registered.
Start the Web browsing software, and access the machine by entering its IP address.
Click [Restrict User Function].
Under "Restrict User Settings", select [Enable] for the function you want to restrict.
Select [Disable] for the functions you do not want to restrict.
Enter the administrator password if required.
Click [Submit].
The user restriction setting is enabled for the selected function. Proceed to the following steps to
register users.
Click [User Function List].
A list of currently registered user entries appears.
Contents Previous Next Settings
