Top Page > Configuring the Machine Using the Control Panel > PDL Settings > Changing PDL Settings
Changing PDL Settings
The procedure for changing the setting for duplex printing is described as an example.
Press the [User Tools] key.
Press the [ ][ ] keys to select [PDL Settings], and then press the [OK] key.
Menu
PDL Settings
Press the [ ][ ] keys to select [System], and then press the [OK] key.
PDL Settings
System
Press the [ ][ ] keys to select [Duplex], and then press the [OK] key.
System
Duplex
Press the [ ][ ] keys to select [Off], [Long Edge Bind], or [Short Edge Bind], and then
press the [OK] key.
Duplex
Off *
The new setting is displayed with an “ ” symbol, indicating that the setting has been changed.
Confirm the current setting, and then press the [ ] key.
Press the [Clear/Stop] key to return to the initial screen.
● You can press the [ ] key to exit to the previous level of the menu tree.
Contents Previous Next Settings
