Returns the scanning unit inside the machine to its original position. Before transporting the
machine, use this function to return the scanning unit to its original position.
● Move To Lock
❍ [Not Execute]
Exits to the previous level of the menu tree without returning the scanning unit to its
original position.
❍ [Execute]
Returns the scanning unit to its original position.
High Humidity Mode
Sets the machine to produce prints in consistent quality even when humidity is high.
Default: [Off]
● Off
● Mode1
Select this mode if printouts are blurred.
● Mode2
Select this mode if printouts are curled and/or blurred. Note that if you select this mode, the
first print takes longer than subsequent prints to complete.
● Mode3
Select this mode if printouts are still curled and/or blurred even when prints are made in
[Mode2]. Note that this mode requires more time to produce the first print than [Mode2].
Color Regist.
Adjusts color registration as necessary. (This adjustment is usually executed by the machine
automatically.)
● [Not Execute]
Exits to the previous level of the menu tree without adjusting color registration.
● [Execute]
Executes color registration adjustment.
TB Cleaning
Sets the machine to execute periodic cleaning of the interior. You may hear some noise while
cleaning is being executed. This noise does not indicate a malfunction.
Default: [On]
● On
● Off
Top Previous Next
Copyright © 2009
