Top Page > Guide to the Machine > Guide to Components > Exterior: Rear View
Exterior: Rear View
1. Button for Sliding the ADF
Press to slide the ADF towards the rear of the machine and hold it in that position, if paper output to the output
tray is difficult to retrieve.
2. Memory Cover
Remove this cover to install the optional memory unit.
3. Power Switch
Use this switch to turn the power on or off.
4. Power Socket
For connecting the power cord to the machine.
5. Rear Cover
Remove this cover when loading paper longer than A4 in tray 1.
6. Cable Cover
Remove this cover when connecting cables to the machine.
7. Ethernet Port
For connecting the machine to the network using a network interface cable.
8. G3 (analog) Line Interface Connector
For connecting a telephone line.
9. External Telephone Connector
For connecting an external telephone.
10. USB Port
For connecting a USB cable.
11. Stop Fences
Raise this fence to prevent paper falling off when printing a large amount of paper at a time. The fence can be
adjusted at the A4/Letter or Legal size position.
● Slide the ADF as shown below. Slide the ADF only when the ADF is closed. Be careful not to trap your fingers when sliding.
Contents Previous Next Settings
