A SERVICE OF

logo

Press to confirm settings or enter the next level of the menu tree.
8. [Clear/Stop] key
❍ While the machine is processing a job: press to cancel the current job.
❍ While configuring the machine: press to cancel the current setting and return to standby mode.
❍ While in standby mode: press to cancel temporary settings such as image density or resolution.
9. [B&W Start] key
Press to scan or copy in black and white, or start sending a fax.
10. [Color Start] key
Press to scan or copy in color.
11. Number keys
Use to enter numerical values when specifying settings such as fax numbers and copy quantities, or enter
letters when specifying names.
12. [Copy] key
Press to switch to copier mode. The key stays lit while the machine is in copier mode.
13. [Facsimile] key
Press to switch to fax mode. The key stays lit while the machine is in fax mode.
14. [Scanner] key
Press to switch to scanner mode. The key stays lit while the machine is in scanner mode.
15. [Density] key
Press to adjust image density for the current job.
❍ Copier mode: select from 5 levels of density.
❍ Scanner mode: select from 5 levels of density.
❍ Fax mode: select from 3 levels of density.
16. [Reduce/Enlarge] key
❍ Copier mode: press to specify the reduction or enlargement ratio for the current job.
❍ Scanner mode: press to specify the scanning size according to the current original.
17. [Pause/Redial] key
❍ Pause
Press to insert a pause in a fax number. The pause is indicated by P.
❍ Redial
Press to display the last used scan or fax destination.
18. [Shift] key
Press if you want to use Quick Dial entries Nos. 11 to 20 when specifying a scan or fax destination.
The backlight of the screen is turned off when the machine is in Energy Saver mode.
When the machine is processing a job, you cannot display the menu for configuring the machine. You can confirm the
machine's status by checking messages on the screen. If you see messages such as Printing, "Mono Copying", "Color
Copying", or Processing, wait until the current job is finished.
A sticker for control panel keys and a name sheet for One Touch buttons may be included, depending on the country of use.
If included, apply the stickers appropriate for your language to the control panel. Note that if the control panel is covered with
a protective sheet, be sure to remove it before applying the stickers.