Dup. Copy Only Supports
A4/B5/LG/LT/Executive
2-sided copy could not be performed
because the tray does not contain
the valid size paper, which are A4,
B5, Letter, Legal, or Executive.
● Specify the tray containing the A4,
B5, Letter, Legal, or Executive size
paper (other than the bypass tray)
in the [Paper Select] setting. See
Copy Settings .
● Specify the A4, B5, Letter, Legal, or
Executive size for the tray selected
for printing copies in the [Paper
Size] setting. See
Machine
Settings .
Dup. Copy Only Supports
Tray 1/Tray 2
2-sided copy could not be performed
because paper is set to be fed from
the bypass tray.
Specify a setting other than [Bypass Tray]
for the [Paper Select] setting. See
Copy
Settings .
Duplex Jam Duplex Misfeed
Jam
Paper has been jammed in the
duplex unit.
Remove the jammed paper. See Removing
Printing Jams .
Email Size Limit Exceeded
Press Clear Key
The scan file exceeds the size limit
for files that can be sent through e-
mail.
● Configure [Resolution] under
scanner settings to reduce the
scanning resolution. See
Scanner
Settings .
● Configure [Limitation Of Size Of
Mail] under scanner settings to
increase the allowed size. See
Scanner Settings .
Fax Job
Memory Full
The machine's memory reached
capacity while storing a fax in
memory before transmission.
Resend the fax in parts as several smaller
individual faxes, or send at a lower
resolution.
Force Printing Continue? Y/N The machine has run out of toner.
● Press the [B&W Start] key or [Color
Start] key to begin printing.
● Press the [Clear/Stop] key to cancel
the job and replace the indicated
print cartridge. See
Replacing Print
Cartridges .
Fax job
Set Correct Paper
The tray set for [Tray Use: Fax]
under [Fax Settings] does not
contain A4, Letter, or Legal size
paper.
While the message is displayed, press the
[OK] key. A menu for changing the paper
size appears on the screen. Load A4/Letter/
Legal size paper in the tray, and then press
a number key that corresponds to the
paper you have loaded. Note that the
[Paper Size] setting for the tray under
[Machine Settings] will be changed.
Fax Jobs Full
Faxes are stored in memory when
using the Memory Transmission,
Auto Redial or broadcast features, or
when received faxes cannot be
printed. The maximum number of
jobs has been reached, so new jobs
cannot be stored.
Wait until pending jobs have been
transmitted or printed.
