Top Page > Using the Fax Function > Sending a Fax > Specifying the Scan Settings > Specifying the resolution
Specifying the resolution
This section describes how to specify the scan resolution for the current job.
There are three resolution settings:
Standard
Select this when the original is a printed or typewritten document with normal-sized characters.
Fine
Select this when the original is a document with small print.
Photo
Select this when the original contains images such as photographs or shaded drawings.
Press the [Image Quality] key.
Press the [Image Quality] key or [ ][ ] keys to select the desired resolution setting,
and then press the [OK] key.
● Press the [ ] key or [Clear/Stop] key to discard the current change and return to the initial screen.
● You can change the machine's default [Resolution] setting to always scan with a specific resolution level.
● Temporary job settings are cleared in the following cases:
❍ When no input is received for the period of time specified in [Auto Clear] while the initial screen is displayed.
❍ When the [Clear/Stop] key is pressed while the initial screen is displayed.
❍ When the machine's mode is changed.
❍ When the power is turned off.
❍ When the machine's default for the same setting is changed.
● For details about [Resolution], see Fax Transmission Settings .
● For details about [Auto Clear], see Administrator Settings .
Contents Previous Next Settings
