● Landscape Column
Scaling is preset to 50%, regardless of the printout paper size.
Use this procedure to set 2-in-1/4-in-1 copy mode for the current job.
Press the [Reduce/Enlarge] key.
Press the [Reduce/Enlarge] key or [ ][ ] keys to select [2in1] or [4in1], and then press
the [OK] key.
Press the [ ][ ] keys to select the desired printout format, and then press the [OK] key.
● If [2in1] has been selected, select [Portrait] or [Landscape].
● If [4in1] has been selected, select [Portrait Row], [Portrait Column], [Landscape Row], or
[Landscape Column].
● Use the following keys to cancel settings:
❍ [ ]: Cancels the changes made to settings and returns the display to the previous screen.
❍ [Clear/Stop]: Cancels the changes made to settings and returns the display to the initial screen.
● You can change the machine's default [Reduce/Enlarge] setting to always make photocopies in 2-in-1 or 4-in-1 mode.
● Temporary job settings are cleared in the following cases:
❍ When no input is received for the period of time specified in [Auto Clear] while the initial screen is displayed.
❍ When the [Clear/Stop] key is pressed while the initial screen is displayed.
❍ When the machine's mode is changed.
❍ When the power is turned off.
❍ When the machine's default for the same setting is changed.
