Top Page > Getting Started > Installing the Machine > Saving Energy
Saving Energy
This machine is equipped with the following Energy Saver modes: Energy Saver mode 1 and Energy Saver
mode 2. If the machine has been idle for a certain period of time, the machine automatically enters Energy
Saver mode.
The machine recovers from Energy Saver mode when it receives a print job, prints a received fax, or when
the [Copy], [Color Start], or [B&W Start] key is pressed.
Energy Saver mode 1
If [EnergySaverMode1] under [Admin Settings] is enabled, the machine enters Energy Saver mode 1
if the machine has been idle for about 30 seconds. When the machine is in Energy Saver mode 1,
the backlight of the screen is turned off and "EnergySaverMode1" appears on the screen. It takes
less time to recover from Energy Saver mode 1 than from power-off state or Energy Saver mode 2,
but power consumption is higher in Energy Saver mode 1 than in Energy Saver mode 2.
Energy Saver mode 2
If [EnergySaverMode2] under [Admin Settings] is enabled, the machine enters Energy Saver mode 2
after the period of time specified for this setting is passed. When the machine is in Energy Saver
mode 2, the backlight of the screen is turned off and "EnergySaverMode2" appears on the screen.
Power consumption is lower in Energy Saver mode 2 than in Energy Saver mode 1, but it takes
longer to recover from Energy Saver mode 2 than from Energy Saver mode 1.
● If the machine is in Energy Saver mode 2 for 24 hours continuously, the machine automatically returns to normal state and
performs self-maintenance.
● For details about [Power Saver], see Administrator Settings .
Top Previous Next
Copyright © 2009
Contents Previous Next Settings
