The machine uses tray 1 and tray 2 if they contain paper of the same size. In this case,
the machine starts to print from tray 1. If tray 1 runs out of paper, the machine
automatically switches to tray 2 to continue printing. If tray 2 runs out of paper, load
paper in tray 1.
❍ Tray1 Only
❍ Tray2 Only
Delete Document
Deletes unsent fax jobs remaining in the machine's memory.
This function is only performed when selected.
● Memory Job Clear
To delete a fax job, select the desired job, and then select [Clear]. Selecting [Not Clear] exits
to the previous level of the menu tree without deleting the fax job.
● All Clear
To delete the fax jobs, select [Clear]. Selecting [Not Clear] exits to the previous level of the
menu tree without deleting the fax job.
Comm Settings
● ECM TX
Sets the machine to automatically resend parts of the data that are lost during transmission.
Default: [On]
❍ Off
❍ On
● ECM RX
Sets the machine to automatically receive parts of the data that are lost during reception.
Default: [On]
❍ Off
❍ On
● Dial Tone Detect
Sets the machine to detect a dial tone before the machine begins to dial the destination
automatically.
Default: [Detection]
❍ Detection
❍ Not Detection
● TX Speed
Specifies the transmission speed for the fax modem.
Default: [33.6 Kbps]
❍ 33.6 Kbps
❍ 14.4 Kbps
❍ 9.6 Kbps
❍ 7.2 Kbps
❍ 4.8 Kbps
❍ 2.4 Kbps
● RX Speed
Specifies the reception speed for the fax modem.
Default: [33.6 Kbps]
❍ 33.6 Kbps
❍ 14.4 Kbps
❍ 9.6 Kbps
❍ 7.2 Kbps
❍ 4.8 Kbps
