Photocopied paper is dirty.
● Image density is too high.
Adjust the image density. See
Adjusting Image Density .
● Toner on the printed surface is
not dry.
Do not touch printed surfaces
immediately after copying.
Remove freshly printed sheets
one by one, taking care not to
touch printed areas.
● The exposure glass or ADF is
dirty. See
Cleaning .
● Before placing originals on the
exposure glass, make sure that
toner or correction fluid is dry.
When copying from the exposure glass, the print area of the copy is out
of alignment with the original.
Place the original copy side down,
making sure that it is aligned to the
rear left corner and pressed flat against
the exposure glass.
Top Previous Next
Copyright © 2009
