Top Page > Configuring the Machine Using the Control Panel > Administrator Settings > Administrator Setting Parameters
Administrator Setting Parameters
This section describes administrator setting parameters.
● Some items might not appear, depending on the model type you are using.
Date/Time Setup
Sets the date and time of the machine's internal clock.
● Date Setting
Specifies the date of the machine's internal clock.
Only dates that correspond with the year and month can be set. Incompatible dates will be
refused.
Default for [Date Format]:
[Mm/Dd/Yyyy], [Dd/Mm Yyyy]
❍ Year: 2000 to 2099
❍ Month: 1 to 12
❍ Date: 1 to 31
❍ Date format: Mm/Dd/Yyyy, Dd/Mm Yyyy, or Yyyy Mm/Dd
● Time Setting
Sets the time of the machine's internal clock.
Default for [Time Format]:
[12 hours], [24 hours]
❍ Time format: 24 hours, 12 hours
❍ Time: Am, Pm (for 12 hours)
❍ Hour: 0 to 23 (for 24 hours), or 1 to 12 (for 12 hours)
❍ Minute: 0 to 59
User Settings
Specifies the user information for sending a fax.
● User Fax #
Specifies the fax number of the machine using up to 20 characters, including 0 to 9, space,
and "+".
● User Name
Specifies the name of the machine using up to 20 alphanumeric characters and symbols.
TEL Line Type
Specifies the line type of the telephone line.
To configure this setting, contact your telephone company and select the setting based on your
telephone line. Selecting a wrong setting may cause failures in fax transmissions.
Default: [Tone]
● Tone
● Pulse 10PPS
● Pulse 20PPS
PBX Selection
Contents Previous Next Settings
