A SERVICE OF

logo

Use the following keys to cancel settings:
❍ [ ]: Cancels the changes made to settings and returns the display to the previous screen.
❍ [Clear/Stop]: Cancels the changes made to settings and returns the display to the initial screen.
You can change the machine's default [Reduce/Enlarge] setting to always make photocopies in the specified ratio.
Temporary job settings are cleared in the following cases:
❍ When no input is received for the period of time specified in [Auto Clear] while the initial screen is displayed.
❍ When the [Clear/Stop] key is pressed while the initial screen is displayed.
❍ When the machine's mode is changed.
❍ When the power is turned off.
❍ When the machine's default for the same setting is changed.
For details about [Reduce/Enlarge], see Copy Settings .
For details about [Auto Clear], see Administrator Settings .
Top Previous Next
Copyright © 2009