Top Page > Using the Fax Function > Receiving a Fax > Receiving a Fax in FAX/TEL Mode
Receiving a Fax in FAX/TEL Mode
When the reception mode is set to FAX/TEL mode, the machine receives a fax automatically if the incoming
call is a fax call and rings when it receives voice calls.
1. When there is an incoming call, the machine tries to detect a fax calling tone for five seconds.
If a fax calling tone is detected, the machine starts to receive the fax automatically.
2. If a fax calling tone is not detected, the machine starts to ring, and continues to try to detect a fax
calling tone for the period of time specified in [F/T Ring Time] under [Fax Settings].
❍ If a fax calling tone is detected, or if you do not pick up the handset, the machine starts to
receive the fax automatically.
❍ To start a normal telephone call, pick up the handset, press the [Facsimile] key, and then
press the [Clear/Stop] key. If you hear a fax calling tone or no sound, receive the fax
manually.
❍ If you pick up the handset but the time specified in [F/T Ring Time] passes before a normal
telephone call starts, the machine starts to receive the fax automatically.
● After you pick up the handset to answer a call, make sure to press the [Facsimile] key to activate fax mode before pressing
the [Clear/Stop] key. If the machine is not in fax mode, pressing the [Clear/Stop] key will not let you start a normal telephone
call.
● For details about [F/T Ring Time], see Fax System Settings .
● For details about manually receiving a fax, see Receiving a Fax in Manual Mode .
Top Previous Next
Copyright © 2009
Contents Previous Next Settings
