A SERVICE OF

logo

Removal and Replacement
Maintenance
6Ć8
Figure 6Ć1:ăOscilloscope Orientation
Equipment Required
The following tools are required to completely disassemble the oscilloscope
into its modules. The tools required to remove an individual module are
listed in the first step of its procedure.
TableĂ6Ć3:ăTools Required for Module Removal
Item
No.
Name Description
1 Screwdriver handle Accepts TorxRĆdriver bits.
2 TĆ15 Torx tip TorxRĆdriver bit for TĆ15 size screw
heads.
3 TĆ20 Torx tip TorxRĆdriver bit for TĆ20 size screw
heads. Used only for removal of the
cabinet handle.
4 FlatĆbladed screwdriver Screwdriver for removing standardĆ
head screws.