TDS 310, TDS 320 & TDS 350 Service Manual
6Ć49
Repackaging Instructions
If you ship the oscilloscope, pack it in the original shipping carton and
packing material. If the original packing material is not available, package
the instrument as follows:
1. Obtain a corrugated cardboard shipping carton with inside dimensions
at least 15Ăcm (6Ăin) taller, wider, and deeper than the oscilloscope. The
shipping carton must be constructed of cardboard with 170 kg
(375 pound) test strength.
2. If you are shipping the oscilloscope to a Tektronix field office for repair,
attach a tag to the oscilloscope showing the instrument owner and
address, the name of the person to contact about the instrument, the
instrument type, and the serial number.
3. Wrap the oscilloscope with polyethylene sheeting or equivalent material
to protect the finish.
4. Cushion the oscilloscope in the shipping carton by tightly packing
dunnage or urethane foam on all sides between the carton and the
oscilloscope. Allow 7.5Ăcm (3Ăin) on all sides, top, and bottom.
5. Seal the shipping carton with shipping tape or an industrial stapler.
