A SERVICE OF

logo

Removal and Replacement
Maintenance
6Ć10
(1) Unplug
(2) Rotate
(3) Pull
Figure 6Ć2:ăLine Cord Removal
3. Find the line cord on the rear cover. (See Figure 6Ć2.) Now, remove the
lineĆcord retaining clamp by first unplugging the line cord from its recepĆ
tacle.
4. Next, grasp both the line cord and the retaining clamp and rotate them
90 degrees counterĆclockwise.
5. Pull the line cord and clamp away to complete the removal.
6. Find the fuse drawer beneath the line voltage plug on the rear panel.
Now, pry open the drawer with a small flatĆbladed screwdriver (Item 4),
and remove the line fuse. (See Figure 6Ć3.)