Filter
Top Products
106
Specifications
Agilent 81130A Specifications
Specification of Trigger Output
This output provides one pulse per period with 50% duty cycle typically.
In pattern mode, the trigger pulse can be set to mark the start of any
segment.
Output Modes
The output mode determines whether the output signal consists of
pulses
bursts of pulses
patterns of pulses
The output signal is controlled by the Trigger mode.
Trigger Output Specification Agilent 81130A
Level (into 50
Ω
): selectable:
TTL into GND
PECL into +3 V
ECL into 2 V
ECL into GND
Output impedance: 50
Ω
typ.
Trigger pulse width: 50% of period typ.
Maximum external voltage: 2 V to +3 V
Transition times: 600 ps typ.
Delay from trigger to output: 32 ns typ.