Filter
Top Products
30
Programming Reference
Agilent 81130A SCPI Command Summary
[:SOURce]
:PHASe[1|2]
<value>
67
[:ADJust]
<value> Set/read channel phase
:PULSe
:DCYCle[1|2]
<value> Set/read channel dutycycle
67
:DELay[1|2]
<value> Set/read channel delay (to leading edge)
68
:HOLD
TIME|PRATio Hold absolute delay|delay as period fixed
with varying frequency
69
:UNIT
S|SEC|PCT|DEG|
RAD
Set/read delay units
70
:HOLD[1|2]
WIDTh | DCYCle |
TDELay
Hold Width|Dutycycle|Trailing edge delay
fixed with varying frequency
70
:PERiod
<value> Set/read pulse period
70
:AUTO
ONCE Measure pulse period at CLK IN
71
:TDelay[1|2]
<value> Set/read trailing edge delay
72
:TRANsition[1|2]
72
:UNIT
S|SEC|PCT Set/read transition-time units
72
[:LEADing]
<value> Set/read leading-edge transition
:TRAiling
<value> Set/read trailing-edge transition
73
:TRIGger[1]
:MODE
CONTinuous | STARt Set/read the mode of the trigger output sig-
nal generation (ignored if not in pattern
mode)
74
:POSition
1 | 2 | 3 | 4 Set/read the trigger output signal position
74
:VOLTage
74
[:LEVel]
[:IMMediate]
TTL | PECL | SYM |
ECLGND | ECLN2V
Set/read TRIGGER OUTput levels
:WIDTh[1|2]
<value> Set/read channel pulse-width
75
Command Parameter Description see page