Agilent Technologies Agilent 81130A 400 Welding System User Manual


 
5
Notice
Agilent Technologies warrants that its software and firmware designated
by Agilent Technologies for use with an instrument will execute its
programming instructions when properly installed on that instrument.
Agilent Technologies does not warrant that the operation of the
instrument software, or firmware, will be uninterrupted or error free.
Limitation of Warranty
The foregoing warranty shall not apply to defects resulting from
improper or inadequate maintenance by the Buyer, Buyer-supplied
software or interfacing, unauthorized modification or misuse, operation
outside of the environmental specifications for the product, or improper
site preparation or maintenance. No other warranty is expressed or
implied. Agilent Technologies specifically disclaims the implied
warranties of merchantability and fitness for a particular purpose.
Exclusive Remedies
The remedies supplied are the Buyer's sole and exclusive remedies.
Agilent Technologies shall not be liable for any direct, indirect, special,
incidental, or consequential damages, whether based on contract, tort or
any other legal theory.
Certification
Agilent Technologies certifies that this product met its published
specifications at the time of shipment. Agilent Technologies further
certifies that its calibration measurements are traceable to the United
States Institute of Standards and Technology, to the extent allowed by
the Institute's calibrating facility, and to the calibration facilities of other
International Standards Organization members.
Services and Support
Any adjustment, maintenance, or repair of this product must be
performed by qualified personnel. Contact your customer engineer
through your local Agilent Technologies Service Center. You can find a
list of local service representatives on the Web at:
http://www.agilent.com/Service/English/index.html