Filter
Top Products
31
Programming Reference
Agilent 81130A SCPI Command Summary
[:SOURce]
:ROSCillator
:SOURce
INTernal|EXTernal Set/read PLL reference source
76
:EXTernal
:FREQuency
<value> Set/read frequency of external PLL
reference. Value will be rounded to 1 MHz,
2MHz, 5MHz or 10MHz.
76
:VOLTage[1|2]
77
[:LEVel]
[:IMMediate]
[:AMPLitude]
<value> Set/read channel amplitude voltage
:OFFSet
<value> Set/read channel offset voltage
77
:HIGH
<value> Set/read channel high-level voltage
78
:LOW
<value> Set/read channel low-level voltage
79
:LIMit
[:HIGH]
<value> Set/read maximum voltage limit
80
:LOW
<value> Set/read minimum voltage limit
80
:STATe
ON|OFF|1|0 Enable|Disable the voltage limits
81
Command Parameter Description see page