Filter
Top Products
26
Programming Reference
Agilent 81130A SCPI Command Summary
Agilent 81130A SCPI Command
Summary
Command Parameter Description see page
:ARM
(Trigger mode and source)
[:SEQuence[1] | :STARt]
[:LAYer[1]]
:LEVel
[:THReshold]
<value> Set/read threshold level at EXT INPUT
43
:TERMination
<value> Set/read the termination voltage at EXT IN-
PUT
43
:MODE
GATed | STARted Set/read the trigger mode, if the source is
not
IMMediate
43
:SENSe
POSitive | NEGative Set/read trigger on edge or gate on level
44
:SOURce
EXT1| IMM | MAN Set/read trigger source
(EXT INPUT| IMMediate | MAN key)
44
:INITiate
:CONTinuous
ON | OFF | 1 | 0 Starts or stops the instrument, if the arming
source is
not
IMMediate
45
:CHANnel
:MATH
OFF|DIGital Set/read addition of channels of channels 1
& 2 at output 1
45