Filter
Top Products
72
Programming Reference
SCPI Instrument Command List
Command
:PULS:TDEL[1|2]
Long
[:SOURce]:PULSe:TDELay[1|2]
Form
Set & Query
Parameter
Numeric
Parameter Suffix
S
with engineering prefixes.
*RST value
100 ns
Specified Limits
Agilent 81131A: 1.25 ns to 999.9 µs
Agilent 81132A: 0.75 ns to 999.9 µs
Description
Use this command to program the delay of the trailing-edge of the pulse
relative to the start of the pulse period. This is an alternative method of
programming the pulse-width.
Example
:PULS:DEL1 500NS
Set OUTPUT 1 delay to 500 ns
:PULS:DEL1:HOLD TIME
Hold OUTPUT 1 delay constant with varying period
:PULS:TDEL1 750NS
Set OUTPUT 1 trailing delay to 750 ns
Command
:PULS:TRAN[1|2]:UNIT
Long
[:SOURce]:PULSe:TRANsition[1|2]:UNIT
Form
Set & Query
Parameter
S | SEC | PCT
*RST value
SEC
Description
Use this command to set the default units for the pulse transition-times.
The default unit is used when the parameter is programmed to a value
without a unit suffix.
Command
:PULS:TRAN[1|2]
Long
[:SOURce]:PULSe:TRANsition[1|2][:LEADing]
Form
Set & Query
Parameter
Numeric