Filter
Top Products
92
Programming Reference
SCPI Instrument Command List
Command
:TRIG:COUN:PULS[1|2]
Long
:TRIGger[:SEQuence[1] | :STARt]:COUNt:PULSes[1|2]
Form
Set & Query
Parameter
Numeric
*RST value
2
Specified limits
2 to 65504
Description
Use this command to set/read the number of pulses within a burst at
OUTPUT 1 or OUTPUT 2.
Examples
To set
STARTED BURST of 16 pulse periods
and
6 Pulses at
Out1
, the burst is started by a positive level at the EXT INPUT:
Command
:TRIG:LEV:TERM
Long
:TRIGger[:SEQuence[1] | :STARt]:LEVel:TERMination
Form
Set & Query
Parameter
Numeric
Parameter Suffix
V
with engineering prefixes.
*RST value
0.0 V
Specified Limits
2.1V to +3.3V
Description
Use this command to program the termination voltage compensation of
the CLK IN connector.
Example
:TRIG:LEV:TERM 2.5V
Set CLK IN termination voltage to 2.5 V
:ARM:SOUR EXT1
:ARM:MODE STAR
:ARM:SENS POS
:TRIG:COUN 16
:TRIG:COUN:PULS1 6
:TRIG:SOUR INT1
:DIG:PATT OFF
Set arming from EXT INPUT
Set started mode
Set arming on positive level
Burst length 16
Set 6 pulses at OUTPUT 1
Pulse period trigger from internal PLL.
Disable pattern operating mode