Filter
Top Products
100D-Link DIR-505 User Manual
Section 5 - Repeater Mode
Wireless Setup
Use this section to manually congure the wireless settings for your D-Link Repeater. After making your changes, click the
Save Settings button.
Enable
Wireless:
Wireless
Mode:
Site Survey:
Wireless
Network
Name:
Channel
Width:
Security
Mode:
Check the box to enable the wireless function. If you do
not want to use wireless, uncheck the box to disable all the
wireless functions. You may also set up a specic time range
(schedule). Select a schedule from the drop-down menu or
click Add New to create a new schedule.
Select Repeater Mode from the drop-down menu.
Scans for available Wi-Fi networks.
When you are browsing for available wireless networks, this
is the name that will appear in the list (unless Visibility Status
is set to Invisible, see below). This name is also referred to as
the SSID. For security purposes, it is highly recommended
to change from the default network name.
Select the appropriate channel width between 20MHz or
Auto 20/40MHz from the drop-down menu.
Select None, WEP, or WPA-Personal. For security purposes,
it is highly recommended that you set this to WPA-Personal.