Filter
Top Products
57D-Link DIR-505 User Manual
Section 3 - Router Mode
Advanced Wireless
Use the dropdown box to set the transmit power of the
antennas.
WMM is Quality of Service(QoS) for your wireless network.
This will improve the quality of video and voice applications
for your wireless clients.
Check this box to reduce the guard interval time therefore
increasing the data capacity. However, this may create a less
reliable connection and may create higher data loss.
Tick this checkbox to enable this feature.
This enables 802.11d operation. 802.11d is a wireless
specication developed to allow implementation of wireless
networks in countries that cannot use the 802.11 standard.
This feature should only be enabled if you are in a country
that requires it.
Tick this checkbox to enable this feature.
Transmit
Power:
WMM Enable:
Short GI:
IGMP
Snooping:
WLAN
Partition:
HT 20/40
Coexistence:
This screen allows you to set various advanced wireless settings of your DIR-505. Unless you are experiencing specic problems,
it is recommended that you leave these settings at their default values. After making your changes, click the Save Settings
button.