Filter
Top Products
77D-Link DIR-505 User Manual
Section 4 - Access Point Mode
Wireless Setup
Enable
Wireless:
Wireless
Network
Name:
Wireless
Mode:
Enable Auto
Channel Scan:
Check the box to enable the wireless function. If you do
not want to use wireless, uncheck the box to disable all the
wireless functions. You may also set up a specic time range
(schedule). Select a schedule from the drop-down menu or
click Add New to create a new schedule.
When you are browsing for available wireless networks, this
is the name that will appear in the list (unless Visibility Status
is set to Invisible, see below). This name is also referred to as
the SSID. For security purposes, it is highly recommended
to change from the default network name.
Select one of the following based on your needs:
• 802.11b Only: Select this if you are only using 802.11b
wireless clients.
• 802.11g Only: Select this if you are only using 802.11g
wireless clients.
• 802.11n Only: Select this if you are only using 802.11n
wireless clients.
• Mixed 802.11g and 802.11b: Select this if you are using
a mix of 802.11g and 11b wireless clients.
• Mixed 802.11n and 802.11g: Select this if you are using
a mix of 802.11n and 11g wireless clients.
• Mixed 802.11n, 802.11g and 802.11b: Select this if you
are using a mix of 802.11n, 11g, and 11b wireless clients.
The Auto Channel Scan setting can be selected to allow
the DIR-505 to choose the channel with the least amount
of interference.
Here, you can congure the wireless network settings of the DIR-505. After making your changes, click the Save Settings button.