Filter
Top Products
116D-Link DIR-505 User Manual
Section 6 - Wi-Fi Hot Spot Mode
Wi-Fi Hotspot Setup
Enable
Wireless:
Wireless
Mode:
Wi-Fi HotSpot
Network
Name:
Channel
Width:
Security
Mode:
Check the box to enable the Wi-Fi hotspot wireless
connection. If this is disabled, the DIR-505 will not connect
to an external hotspot, and will have no Internet connection
source to share.
This will state Wi-Fi Hot Spot Mode when in Wi-Fi Hot
Spot Mode. You can click the Site Survey button to look
for available hotspots to connect to. Selecting a wireless
network from the list that appears will automatically ll in
the settings below.
Enter the name of the Wi-Fi hotspot wireless network you
want to connect the DIR-505 to. You can use the Site Survey
button to ll this in automatically.
Select the appropriate channel width to use from the
dropdown box. If you are not sure what to use, leave the
setting on Auto.
Select the wireless encryption used by the Wi-Fi hotspot you
are connecting to. You can use the Site Survey button to
ll in most of the information automatically; you can then
just enter the password(WEP Key or Pre-Shared Key) for the
Wi-Fi hotspot.
The Wi-Fi Hotspot Setup page allows you to enter the settings of the Wi-Fi hotspot that the DIR-505 will connect to and
share access to. Please note that this is dierent from the wireless network created by the DIR-505 that you will connect your
devices to. After making your changes, click the Save Settings button.