Filter
Top Products
129D-Link DIR-505 User Manual
Section 6 - Wi-Fi Hot Spot Mode
Time
Time Zone:
Enable
Daylight
Saving:
Enable NTP
Server:
NTP Server
Used:
Date and
Time:
Select the Time Zone from the drop-down menu.
To select Daylight Saving time manually, click the Enable
Daylight Saving check box. Next use the drop-down menu
to select a Daylight Saving Oset and then enter a start
date and an end date for daylight saving time.
NTP is short for Network Time Protocol. NTP synchronizes
computer clock times in a network of computers. Check this
box to use a NTP server. This will only connect to a server on
the Internet, not a local server.
Enter the NTP server or select one from the drop-down
menu.
To manually input the time, enter the values in these elds
for the Year, Month, Day, Hour, Minute, and Second and
then click Save Settings. You can also click the Copy Your
Computer’s Time Settings button at the bottom of the
screen.
The Time page allows you to congure, update, and maintain the correct time on the internal system clock. From this section
you can set the time zone that you are in. Daylight Saving can also be congured to automatically adjust the time when needed.
After making your changes, click the Save Settings button.