Filter
Top Products
105D-Link DIR-505 User Manual
Section 5 - Repeater Mode
Wi-Fi Protected Setup
Check this box to enable the WPS functions of the DIR-505.
Disabling this will disable the WPS PIN method of connection
and conguration. If you want to recongure the router using
the WPS PIN method, click on the Reset to Uncongured
button. You will still be able to add wireless clients through
WPS.
Shows the router’s current PIN. You can reset it to the default
value by clicking on the Reset PIN to Default button, or you
can create a new PIN number by clicking on the Generate
New PIN button.
Here, you can click on the Add Wireless Device With WPS
button to go through a wizard that helps you connect other
devices through WPS.
Enable:
Disable WPS
PIN Method:
PIN Settings:
Add Wireless
Station:
Wi-Fi Protected Setup (WPS) System is a simplied way to set up the basic settings of the DIR-505. It can also be used to
automatically create a secure wireless connection to a wireless client. After making your changes, click the Save Settings button.