Filter
Top Products
120D-Link DIR-505 User Manual
Section 6 - Wi-Fi Hot Spot Mode
LAN Setup
This section will allow you to change the local network settings of the DIR-505 and to congure the DHCP settings. After making
your changes, click the Save Settings button.
Device Name:
Dynamic IP
(DHCP) LAN
Connection
Type:
DHCP Server
Settings:
Enter the Device Name of the DIR-505. It is recommended
that you change the Device Name if there is more than one
D-Link device in your subnet.
Here, you can edit the IP Address, Subnet Mask, and Local
Domain Name for the DIR-505 to use.
Ticking the Enable DHCP Server checkbox allows the
DIR-505 to assign IP addresses to the devices on your
network. by using DHCP. You can set the range of allowable IP
addresses using the DHCP IP Address Range text boxes, and
you can set the DHCP Lease Time with the corresponding
text box.