Filter
Top Products
62D-Link DIR-505 User Manual
Section 3 - Router Mode
Password:
Verify
Password:
Enable
Graphical
Authentication:
Enable HTTPS
Server:
Enable Remote
Management:
Remote Admin
Port:
Enter a new password for the Administrator Login Name. The
administrator can make changes to the settings.
Enter the same password that you entered in the previous
textbox in order to conrm its accuracy.
Check to enable Graphical Authentication, or CAPTCHAs
when logging in to the web UI of the DIR-505. This provides
an extra layer of security by requiring you to enter a code
that is displayed on-screen.
Check to enable HTTPS when connecting to the router for
conguration. When enabled, you will need to enter https://
to connect to the DIR-505. For example: https://dlinkrouter
Remote management allows the DIR-505 to be congured over
the Internet through a web browser. A username/password is
still required to access the conguration interface.
This is the port that will be used to access the DIR-505
conguration interface when using remote management. You
will need to add this port number after the IP address.
Example: http://x.x.x.x:8080 where x.x.x.x is the IP address of
the DIR-505 and 8080 is the remote admin port.
Maintenance
Admin
This page will allow you to change the password for the administrator account for conguring the settings of the DIR-505. You
can also turn on graphical authentication(CAPTCHA) on this page. After making your changes, click the Save Settings button.