Filter
Top Products
60D-Link DIR-505 User Manual
Section 3 - Router Mode
Guest Zone
Tick this checkbox to enable the Guest Zone feature.
Select when the Guest Zone will be active. The schedule may
be set to Always, which will allow the Guest Zone to be on at
all times. You can select a schedule you created, or you can
click the Add New Schedule button to create a schedule.
Enter a wireless network name (SSID) for your guest zone.
It should be dierent than the network name of your main
wireless network.
Check to allow network connectivity between the Guest
Zone and your main network.
Here, you can select between None, WEP, WPA-Personal,
and WPA-Enterprise. Refer to ”Wireless Settings” on page
39 for information on how to congure the dierent security
modes.
Enable Guest
Zone:
Add New
Schedule:
Wireless
Network
Name:
Enable
Routing
Between
Zones:
Security
Mode:
The Guest Zone feature will allow you to create a separate wireless network that can be used by guests to access the Internet.
These zones will be separate from your main wireless network, allowing you to share Internet access without allowing them
to connect to your own devices. After making your changes, click the Save Settings button.