Filter
Top Products
35D-Link DIR-505 User Manual
Section 3 - Router Mode
Select Static if your ISP assigned you an IP address, subnet
mask, gateway, and DNS server address. In most cases, select
Dynamic.
Enter the IP address (Static PPTP only).
Enter the primary and secondary DNS server addresses (for
static PPTP only).
Enter the gateway IP address provided by your ISP.
Enter the server IP provided by your ISP (optional).
Enter your PPTP username.
Enter your PPTP password and then retype the password
in the next box.
Select either Always-on, On-Demand, or Manual.
Enter a maximum idle time during which the Internet
connection is maintained during inactivity. To disable this
feature, set the Reconnect Mode to Always on.
If you selected PPTP, you will see the following settings. Your ISP will provide you with a username and password. This option
is typically used for DSL services.
Address
Mode:
PPTP IP
Address:
PPTP Subnet
Mask:
PPTP
Gateway IP
Address:
PPTP Server
IP Address:
Username:
Password:
Reconnect
Mode:
Maximum
Idle Time: