Filter
Top Products
31D-Link DIR-505 User Manual
Section 3 - Router Mode
Manual Internet Setup
This should be set to Router mode. If you want to use Access
Point mode, select Access Point mode and click the Save
Settings button to switch to the Access Point conguration
interface. For more information, refer to “Access Point Mode”
on page 75.
Select the connection mode to use: Dynamic IP (DHCP),
PPPoE, PPTP, or L2TP. The remaining settings will change
depending on which connection mode you use.
Note: Most cable modem connections use DHCP, and
most DSL connections use PPPoE. If you are not sure which
connection mode to use, contact your Internet service
provider.
Operation
Mode:
Host Name:
If you clicked Manual Internet Connection Setup on the Internet Settings page, you will see this screen. Here, you can
congure the Internet connection for your DIR-505. After making your changes, click the Save Settings button.