Filter
Top Products
126
CHAPTER2 Dependence Functions
Note:
Sequencer (Only Real-time Monitoring Bus Interface)
1. This function can be used only when the evaluation chip is the FR60Lite or FR80S.
When FR80S is used, however, this function is valid only if the internal RAM space is allowed for
write access.
2. There are cases when the actual code execution order and the data hit information order are
switched, depending on the output timing of the external trace data.
For that reason, if a code event and data event are closed, there are cases in which normal
transition is impossible.
3. This function cannot be used when the performance mode is set as the event mode.
For details, refer to "1.6 SET MODE" in "SOFTUNE Workbench Command Reference Manual".